A compact, cost-efficient, reliable control for PM, Shunt Wound DC motors and Universal motors. The 125 Series variable speed control incorporates up-to-date design and engineering into an amazingly small package. Installation and field adjustment are facilitated using a barrier type terminal strip and large, easily adjusted trimpots. Adjustable horsepower range – 120VAC, 1/50 through 1/8 HP and 1/4 through 1/2 HP; 240VAC, 1/25 through 1/4 HP and 1/8 through 1 HP. Standard features include an inhibit circuit for start-stop operation and 1% speed regulation over a 50:1 speed range. Dual voltage 120/240VAC or 24/36VAC models are available. Long life and quality are assured by 100% full load testing. The 125 Series is ideal for applications such as: office machinery, conveyors, packaging equipment, printers, process equipment, centrifuges, and exercise equipment.
Unit of Measure

Model Number

 N/A 02292078

Series

 N/A 125D Series

Style

 N/A Chassis

Input (VAC)

 N/A 24 or 36

Output (VDC)

 N/A 0-20 (24 VAC) 0-30 (36 VAC)

Output HP Range

 N/A 0.15-5.5 ADC ARMATURE

Current

 N/A 5.5 ADC

Weight

 N/A 12.5 oz354 g

MINO

 N/A 04489X49236

Depth

 N/A 1.30 in33 mm

Width

 N/A 3.63 in92.2 mm

Length

 N/A 4.25 in107.6 mm

Features

 N/A
  • Dual Voltage 120/240 VAC or 24/36 VAC, 50/60Hz
  • ± 10% rated line voltage
  • Adjustable horsepower settings
  • Barrier terminal strip
  • Full wave bridge supply
  • 1% speed regulation
  • Adjustable Minimum speed (0–30% of base)
  • Adjustable Maximum speed (66–100% of base)
  • Adjustable IR Compensation
  • Adjustable Current Limit
  • Adjustable Linear Acceleration & Deceleration (-2A)
  • -10° to +45°C ambient temperature
  • Line voltage compensation
  • 5K ohm speed potentiometer kit included
  • 50:1 speed range
  • Overload capacity: 200% for one minute
  • Transient voltage protection
  • Voltage follower mode - isolated signal (0–10 VDC)
  • Inhibit circuit–permits low power start & stop
    •