The 250 Series offers superb flexibility, reliability, and value. A general purpose, economical control rated to 2 horsepower, it provides the ultimate in standard features and versatility including: dual voltage (120/240VAC), adjustable H.P. settings, packaged power bridge, barrier terminal strip, fully rated-no auxiliary heatsink required, and chassis or NEMA 4/12 enclosure. Many options further extend the 250’s capabilities. A logical, easily accessible layout simplifies installation and adjustment. Clean design, quality components and careful assembly are trademarks of Dart Controls.
Unit of Measure

Model Number

 N/A 06550716

Series

 N/A 253G-E Series

Style

 N/A Enclosed

Input (VAC)

 N/A 120/240

Output (VDC)

 N/A 0-90/180

Output HP Range

 N/A 1/8-1 (90V) 1/4-2 (180V)

Depth

 N/A 2.75 in69.8 mm

Width

 N/A 5.53 in141 mm

Length

 N/A 7.25 in184.2 mm

Weight

 N/A 17.50 oz486 g

Current

 N/A 10 ADC

Features

 N/A
  • Dual Voltage 120/240 VAC, 50/60Hz
  • Full HP rated - no auxiliary heat sink required
  • ± 10% rated line voltage
  • Adjustable horsepower settings
  • Barrier terminal strip
  • Full wave bridge supply
  • 1% speed regulation
  • Adjustable Minimum speed (0–30% of base)
  • Adjustable Maximum speed (66–100% of base)
  • Adjustable IR Compensation
  • Adjustable Current Limit
  • Adjustable Linear Acceleration
  • -10° to +45°C ambient temperature
  • Line voltage compensation
  • 5K ohm speed potentiometer kit included
  • 50:1 speed range
  • Overload capacity: 150% for one minute
  • Transient voltage protection
  • Voltage follower mode - isolated signal (0–12 VDC)
  • Inhibit circuit–permits low power start & stop
    •

    MINO

    		 N/A 04489X02022