Dart Controls
5000 W. 106th Street
Zionsville, IN 46077
Phone: (317) 873-5211
Fax: (317) 873-1105
E-Mail: sales@dartcontrols.com
Website:www.dartcontrols.com
Print Back
The 250 Series offers superb flexibility, reliability, and value. A general purpose, economical control rated to 2 horsepower, it provides the ultimate in standard features and versatility including: dual voltage (120/240VAC), adjustable H.P. settings, packaged power bridge, barrier terminal strip, fully rated-no auxiliary heatsink required, and chassis or NEMA 4/12 enclosure. Many options further extend the 250’s capabilities. A logical, easily accessible layout simplifies installation and adjustment. Clean design, quality components and careful assembly are trademarks of Dart Controls.
Unit of Measure

Technical Specs

Model Number

 N/A 15017105

Series

 N/A 253G-C Series

Style

 N/A Chassis

Input (VAC)

 N/A 120/240

Output (VDC)

 N/A 0-90/180

Output HP Range

 N/A 1/8-1 (90V) 1/4-2 (180V)

Weight

 N/A 14.25 oz404 g

Current

 N/A 10 ADC

MINO

 N/A 04489X00075

Dimensions

Depth

 N/A 1.63 in41.4 mm

Width

 N/A 5.53 in141 mm

Length

 N/A 7 in177.8 mm

Features

Features

 N/A
  • Dual Voltage 120/240 VAC, 50/60Hz
  • Full HP rated - no auxiliary heat sink required
  • ± 10% rated line voltage
  • Adjustable horsepower settings
  • Barrier terminal strip
  • Full wave bridge supply
  • 1% speed regulation
  • Adjustable Minimum speed (0–30% of base)
  • Adjustable Maximum speed (66–100% of base)
  • Adjustable IR Compensation
  • Adjustable Current Limit
  • Adjustable Linear Acceleration
  • -10° to +45°C ambient temperature
  • Line voltage compensation
  • 5K ohm speed potentiometer kit included
  • 50:1 speed range
  • Overload capacity: 150% for one minute
  • Transient voltage protection
  • Voltage follower mode - isolated signal (0–12 VDC)
  • Inhibit circuit–permits low power start & stop
    •