Dart Controls
5000 W. 106th Street
Zionsville, IN 46077
Phone: (317) 873-5211
Fax: (317) 873-1105
E-Mail: sales@dartcontrols.com
Website:www.dartcontrols.com
Print Back
Dart Controls continues its investment in the development of rugged and dependable DC drives. The 125DV200E is the latest example. The cast aluminum powder coated enclosure available in both black and white is rated NEMA 4X for wash down, outdoor and food/sanitary applications. One drive will handle both 120VAC and 240VAC source power for motors from 1/4HP through 2HP. Dart’s standard auto-sensing voltage circuit means no jumper settings or wiring changes are necessary. The drives are fully adjustable across their HP ratings – no extra resistors to purchase or keep track of. Options include adjustable linear ACCEL and DECEL; voltage and current follower isolated inputs.
Unit of Measure

Technical Specs

Model Number

 N/A 06550704

Series

 N/A 125DVE Series

Input (VAC)

 N/A 120/240

Output (VDC)

 N/A 0-90/180

Output HP Range

 N/A 1/4 - 2

Weight

 N/A 64 oz1810 g

Current

 N/A 10 ADC

Operator Controls

 N/A PILOT LIGHT, SPEED POT, ON/OFF, FWD/STOP/REV, RUN/JOG

MINO

 N/A 04489X02010

Dimensions

Depth

 N/A 5.50 in141 mm

Width

 N/A 5.00 in127 mm

Length

 N/A 9.50 in421 mm

Features

Features

 N/A
  • Dual Voltage 120/240 VAC or 24/36 VAC, 50/60Hz
  • ± 10% rated line voltage
  • Adjustable horsepower settings
  • Barrier terminal strip
  • Full wave bridge supply
  • 1% speed regulation
  • Adjustable Minimum speed (0–30% of base)
  • Adjustable Maximum speed (66–100% of base)
  • Adjustable IR Compensation
  • Adjustable Current Limit
  • Adjustable Linear Acceleration & Deceleration (-2A)
  • -10° to +45°C ambient temperature
  • Line voltage compensation
  • 5K ohm speed potentiometer kit included
  • 50:1 speed range
  • Overload capacity: 200% for one minute
  • Transient voltage protection
  • Voltage follower mode - isolated signal (0–10 VDC)
  • Inhibit circuit–permits low power start & stop
    •