Dart Controls
5000 W. 106th Street
Zionsville, IN 46077
Phone: (317) 873-5211
Fax: (317) 873-1105
E-Mail: sales@dartcontrols.com
Website:www.dartcontrols.com
Print Back
The 130 Series reversing control from Dart Controls utilizes Dart’s unique zero-speed detect and solid state dynamic braking circuits. These circuits eliminate the contact arcing and failed braking problems associated with other reversing and dynamic braking controls. Dart’s zero-speed detect circuit also eliminates motor plug reversing problems. In the event of a power loss or emergency stop condition, the 130 Series control will drop into a dynamic brake condition to safely and quickly bring the motor to a stop and remain there until power is reapplied and a run condition is recognized. The 130 Series control comes in a compact package and fits the industry standard footprint for both vertical and horizontal mounting.
Unit of Measure

Technical Specs

Model Number

 N/A 03894557

Series

 N/A 130 Series

Style

 N/A Chassis

Cycle Rate

 N/A Low / 3 per min

Input (VAC)

 N/A 120

Output (VDC)

 N/A 90

HP Range

 N/A 1/8 to 1/2

Weight

 N/A 490 g

Current

 N/A 5.5 ADC

MINO

 N/A 04489X00009

Dimensions

Depth

 N/A 2.65 in67.3 mm

Width

 N/A 4.25 in108 mm

Length

 N/A 5.06 in128.5 mm

Features

Features

 N/A
  • Two single supply voltage options: 120 & 240 VAC
  • Full HP rated - no auxiliary heat sink required
  • ± 10% rated line voltage, 50/60Hz operation
  • Adjustable horsepower settings
  • Barrier terminal strip
  • Full wave bridge supply; 1% speed regulation
  • Adjustable Minimum speed (0–30% of base)
  • Adjustable Maximum speed (60–100% of base)
  • Adjustable IR Compensation
  • Adjustable Current Limit
  • -10° to +45°C ambient temperature
  • Line voltage compensation
  • 5K ohm speed potentiometer kit included
  • 50:1 speed range
  • Overload capacity: 200% for one minute
  • Transient voltage protection
  • Voltage follower mode - isolated signal (0–10 VDC)
  • Inhibit circuit–permits low power start & stop
  • Automatic dynamic brake on power loss
  • Available in chassis models only
    •